GFP Premium with more activated carbon
Activated carbon block filter with 0.40 µm filter fineness with a thicker filter layer than the standard NPF cartridge. Particularly suitable for the safe retention of metals such as copper and lead.
The GFP Premium is a sintered activated carbon block filter cartridge for drinking water filtering with a flow rate of approx. 2 liters per minute (depending on the water pressure
GFP Premium with more activated carbon
Activated carbon block filter with 0.40 µm filter fineness with a thicker filter layer than the standard NPF cartridge. Particularly suitable for the safe retention of metals such as copper and lead.
The GFP Premium is a sintered activated carbon block filter cartridge for drinking water filtering with a flow rate of approx. 2 liters per minute (depending on the water pressure).
Carbonit® Monoblock : a baked block filter, awarded several times and scientifically recognized: combines the well-known adsorptive powers of sintered activated carbon (eg pesticides) with mechanical filtration (eg bacteria). (Not to be confused with loose fills of granulated carbon or extruded blocks).
Areas of application
Compared to the main NFP type, GFP cartridges have a 55% higher activated carbon mass. The activated carbon mass determines the adsorptive retention rate (ARR) and retention capacity (ARK). Therefore, the application is recommended for high adsorption requirements (decolorization, odor removal,...)
The GFP Premium fits into the filter devices
- SANUNO
- VARIO HP
- DUO HP
- QUADRO HP
Attention: In contrast to the NFP type (2x flat seals, each 4mm, top and bottom), GFP cartridges only have one with a thickness of 8mm. This must always be used on the bottom cover side (side of the cartridge without a central outlet hole). For technical reasons, use is only permitted with cold water; protect against frost. Technical data "GFP Premium"
Flow: | 1.5 ... 2.5 l/min (at 4 bar, after 5 min. running-in time) |
Service life: | 6 months at max. 10,000 liters |
Filter fineness: | 0.45μm |
Mass: | d = 75 mm, L = 248 mm (9 3/4'') |